Rezultāti

Injection moulding technology - Vācija

24 Uzņēmumi

0 Produktai

VWH GMBH

Vācija

Tool and mould construction is an additional mainstay of our business. Our focus in this area is on plastic injection moulds for sophisticated technical parts. Our more than 30 years of experience in this area form the basis for innovative ideas, professional production and smooth implementation of projects. Insert and outsert injection moulding technology and sampling of injection moulds are part of our standard services, and our in-house injection moulding shop enables us to react spontaneously to your requirements. We can develop 0-series, prototypes and pre-series at very short notice. VWH offers a diverse pool of skills, ranging from development of initial ideas and designs to the production process through to packaging management. This enables us to ensure project support right from the very beginning. This is beneficial both for the customer and for the end product.

Mājas lapu
SAXONIA-FRANKE GMBH & CO. KG

Vācija

As a quality-conscious family business, SAXONIA-FRANKE supports its customers in all areas relating to stamping and forming technology, plastic injection-moulding technology and assembly installation. The company was founded in 1981 by Jörg Franke in Göppingen. The opportunity to move into a new, larger production building arose as early as 1987. Over the following years, extensions were built repeatedly, in order to cope with the constantly increasing order development in the company. In 2016, a new logistics centre was inaugurated. This measure allowed the production area to be expanded. Back in 2011, a generational change was introduced, and Felix Franke entered the management. Our success is based on innovation and drive, as well as a continuous commitment to quality and delivery reliability. This is ensured through qualified employees, through the use of the latest technology for machinery and through a uniform and sustainable concept for the implementation of tasks put forward by the customer. It's important to us here that the quality and economy of our work and products are closely linked with responsibility for the environment and society. Our integrated management system includes quality, environmental, work and health management. We are certified in line with ISO TS 16949, ISO 9001, ISO 14001, EMAS III and OSHAS, and are practitioners of the German Sustainability Code.

Mājas lapu
BECHTOLD & SOHN GMBH & CO. KG

Vācija

A name that has sounded good since 1885. It is not a sheer coincidence that Bechtold & Sohn can look back on a long and successful history. Now in its fourth generation, the family-run company will continue to remain on course with the same values held by master woodturner Johann Peter Bechtold when he founded his company back in 1885: Quality, continuity, personality and dedication. These virtues form the cornerstone of the company philosophy and have enabled Wolfgang Bechtold and his 150 employees to gain an excellent reputation among industrial companies, predominantly in the fields of pharmaceuticals, medicine and chemistry. Enthusiasm for plastic and technology Plastic has been the material of choice at Bechtold & Sohn for more than five decades now. This results in an enormous wealth of experience which our highly skilled employees use to produce plastic parts for well-known customers in three-shift operation.

Mājas lapu
PLS GMBH

Vācija

The top objective of our company is to make our customers happy. This means that we must recognise their needs, satisfy their requirements and exceed their expectations. In addition to a high product quality, the range of services offered is an important criterion for many customers. This is why we have striven right from the start to set up our departments in such a way that they complement each other. The collaboration between our mould construction, injection moulding, industrial assembly, quality assurance and post-processing departments allow us to cater expertly and very flexibly to the wishes of our customers. The prerequisite for this is communication. We need information to be able to offer an optimum product. This is why we consider feedback of any kind as important information for continuous improvement and further development. This is a cornerstone of our company's success.

Mājas lapu
WETEC GMBH

Vācija

Uzņēmums WETEC GMBH, ir Ražotājs/ Izgatavotājs, gadā un darbojas Gumijas un plastmasas iesmidzināšana nozarē. Tas darbojas arī Plastic assemblies, Plastic precision parts, Plastic injection-moulded parts, Technical-grade plastic parts, Plastics processing, Prototype construction, Injection moulding tools for plastics, injection moulds, un Injection-moulded parts made from thermoplastics nozarēs. Tas atrodas Schweppenhausen, Vācija.

Lapa jūsu uzņēmumam

Jūs varat redzēt šo? Arī Jūsu potenciālie klienti Pievienojaties mums, lai būtu redzamiem europages mājas lapā.

Pievienot manu uzņēmumu

BWF KUNSTSTOFFE GMBH & CO. KG

Vācija

Uzņēmums BWF KUNSTSTOFFE GMBH & CO. KG, ir Ražotājs/ Izgatavotājs, gadā un darbojas Plastmasas plāksnes nozarē. Tas darbojas arī Konstrukciju profili no plastmasas, Biroju apgaismojums, plastic hoses, Konstrukciju profili no plastmasas, optical films, deep-drawn metal parts, injection moulding, Biroju apgaismojums, un Light-directing sheets nozarēs. Tas atrodas Offingen, Vācija.
MPI EUROPE GMBH

Vācija

Uzņēmums MPI EUROPE GMBH, ir Ražotājs/ Izgatavotājs, gadā un darbojas Gumijas un plastmasas iesmidzināšana nozarē. Tas darbojas arī Molded plastic parts, Plastic injection-moulded parts for the automotive industry, Plastic injection-moulded parts for medical technology, Plastic injection-moulded parts for small batches, Plastic injection moulded parts, technical, for vehicle construction, Technical-grade plastic parts, Injection-moulded parts, technical, Plastic moulded parts, reinforced with glass fibre, un Plastic components for medical technology nozarēs. Tas atrodas Doebeln, Vācija.
REICH MIM GMBH

Vācija

The expertise of Reich MIM GmbH is the production of metal injection moulded parts, or MIM for short. Reich MIM GmbH is located in Schwarzenberg in the German federal state of Saxony. With over 40 employees and a production area of approx. 2200 m², Reich MIM GmbH is a medium-sized company that is entirely family-owned. MIM technology is suitable for components with a high degree of shape complexity that are to be produced without reworking (undercuts, threads). The main areas of application are automotive and mechanical engineering, measurement and control technology, precision mechanics, the lock and fittings industry, tool technology, medical technology and the field of household appliances.

Mājas lapu
GRONBACH

Vācija

Since 1964, Gronbach has been developing and producing components and complex assemblies on a production area of over 20, 000 m2 with 1100+ employees and has also specialized in the machining of stainless steel and aluminum, surface finishing and plastic injection molding. In addition, a separate department is dedicated to the development of new surface technologies, manufacturing and assembly processes. Gronbach is also a system supplier for OEM equipment, e.g. in the household appliance industry, the automotive sector, the sanitary industry and other branches of industry. Another business unit is the development and optimization of blower systems and the injection molding of plastic fan wheels. Gronbach is thus also a manufacturer of blowers and fan components.

Mājas lapu
ETIMEX PRIMARY PACKAGING GMBH

Vācija

Etimex realises high-quality packaging solutions for food, pet food, baby food, convenience items, pharmaceuticals and technical items alongside you. With our highly motivated and experienced team, we offer the maximum flexibility and efficiency for your requirements of packaging solutions consisting of plastic films and plastic containers. We use leading technologies in the extrusion, thermoforming, injection moulding, barrier injection moulding and IML (in-mould labelling) production stages. We support you from the initial idea through design development, prototype production (3D) and pilot tool and tool manufacturing, right up to production and delivery. Product packaging of the highest level. Plastic packaging has been our contribution to the optimal protection and attractive presentation of your high-quality products for more than 65 years. ETIMEX produces: MEAL TRAYS, THERMOFORMING SHEETS, FLEXIBLE FILMS, PHARMACEUTICAL FILMS, INJECTION MOULDING CUPS, SEALING FILMS.

Mājas lapu

W.AG FUNKTION+DESIGN GMBH

Vācija

W.AG Funktion + Design GmbH, based in Geisa, Germany, was founded in 1992 and currently has 180 employees. Bertram Göb is the managing director. W.AG started out initially as a supplier of technical injection moulding components, but soon went on to develop its own range of cases and containers. The company's major breakthrough happened in 1997 with the TEKNO plastic case. Building on this success, W.AG developed numerous other case, box and containers series in the following years, such as the small product packaging SWING, the heavy-duty case HEAVY, the JAZZ model range, the slim plastic case BEAT and the highly functional design case TWIST. Alongside developing cases and boxes and continuously expanding into injection moulding and tool manufacturing, the company built up competencies in areas of foam processing and printing technology.

Mājas lapu
E-PROPLAST GMBH

Vācija

Our company works with synthetic materials and specialises in the manufacture of PET bottles. Development, design and production of PET bottles and containers: We make PET bottles with volumes of 20 – 1000 ml. We have a production capacity of more than 150 million bottles per year. The one-step injection stretch blow moulding plant and two-step stretch blow moulding plant we use are state-of-the-art technology for the production of PET bottles and containers. We produce our own preforms in modern facilities. Use in industry: Cosmetics, cleaning products, chemicals, honey, mustard, sauces, fruit juices, spirits, vinegar and cooking oil, milk, mixers and other beverages. One of our specialities is the development and production of so-called panel-less PET hot fill bottles. Our flexible manufacturing technique allows us to fulfil small as well as large batch orders at low prices.

Mājas lapu

ALWA TECHNISCHE PRODUKTE FÜR KUNSTSTOFFVERARBEITUNG, MODELL UND FORMBAU GMBH

Vācija

Our patented casting resin system, ALWA MOULD D, is the fastest curing casting resin system in the world. It is very easy to process and does not need to be post-tempered. Our easy to use system has a pot life of only 20 minutes! Deep drawing can take place immediately after demoulding. From 1 to 2500 kg, everything from large bathtubs to small chocolate moulds can be cast. Commercial vehicle manufacturer Aixam has been successfully working with our system for years. With our innovative ALWA POR porous plates, the time-consuming drilling of vacuum holes is no longer necessary. They impress with high stability, compressive strength and a permanent temperature resistance of over 190 °C. ALWA POR is suitable for vacuum deep drawing and forming processes as well as aeration for aquariums, fish ponds and sewage treatment plants, ventilation of injection and blow moulds, all processes with hot air and steam, vacuum clamping technology, filter applications, air film sliding technology, foundry, etc.

Mājas lapu
SPIES PACKAGING / SPIES KUNSTSTOFFE GMBH

Vācija

For over 55 years, manufacturing plastic packaging has been our passion. As the leading manufacturer of injection-moulded plastic packaging, we offer a variety of options to professional package and successfully sell food and non-food articles. Our customers trust us to act as their development and systems partner. We design new articles, construct and build injection moulding tools and manage series production. And it's all done by one provider at our location in Germany. We bring passion and character to our mastery of the "Art of Packaging" at the highest level, in every detail. We can reliably manage series production and we are experts in working with individual requirements and tailoring to our customers' needs. Thanks to the innovating IML process (In-Mould Labelling), we can design and decorate according to individual customer requests. By using highly automated precision machines and plants, regularly investing in our technology and in-house tool manufacturing, we guarantee optimal conditions and future-oriented processes. We are a family-run company with local roots. We value tradition while still orientating ourselves towards the future. For our customers and our team, we are a trustworthy and innovative partner. We take digitalisation, sustainability and Industry 4.0 very seriously.

Mājas lapu
CAST-SOLUT GMBH

Vācija

CAST SOLUT GmbH was founded in 2007 and distributes its products all over the world. We offer a comprehensive rapid tooling and prototyping service, from developing the concept to the first prototypes and then the final component design ready for series production. Our range of services spans both 3D printing processes such as SLA, SLS, metal printing, etc. and conventional manufacturing processes such as vacuum casting, RIM, injection moulding and dies, investment casting, CNC components, pressure die casting and surface treatments. Our technology solution service ranges from consulting for manufacturing concepts to distribution and training. Our KLM Maschinenbau brand has made a name for itself on the global market thanks to its innovation, quality and service – this combination enables us to offer a wide range of machinery and custom solutions. Our core business activities are focussed on vacuum chambers, casting/metering equipment and curing and hardening systems. We also offer third-party 3D printing systems.

Mājas lapu
EWOQE GMBH & CO. KG

Vācija

EWOQE GmbH & Co. KG is your innovative partner in additive manufacturing and prototype construction, specialising in technical plastic injection-moulded parts and tailored solutions for vehicle construction, medical technology and beyond. With a focus on rapid prototyping, rapid tooling and 3D printing technologies, we offer a wide range of services, from 3D designs to small series production. Our expertise extends to the optimisation of component functions and throughput times in order to boost your innovative strength and save costs. Our aim is to efficiently solve challenges such as missing components or a lack of production capacity, and to offer you tangible added value. We see 3D printing as a tool for promoting innovation that fits perfectly into your production processes. From brainstorming to realisation, we support you with custom advice, and use our comprehensive expertise to successfully implement your projects. At EWOQE, we pride ourselves on achieving outstanding results every day, and see ourselves as your reliable B2B partner. Contact us at info@ewoqe.com to find out how we can contribute to the success of your next project with our expertise in 3D printing and additive manufacturing. Come to us to discover the unlimited possibilities of 3D printing for your product development.

Mājas lapu
CONEC ELEKTRONISCHE BAUELEMENTE GMBH

Vācija

CONEC Elektronische Bauelemente GmbH is an efficient manufacturer of high-quality connectors, patch cable and single ended cable as well as enclosure technology. CONEC products are used in automation, telecommunications and energy technology, machine manufacturing, agriculture and medical technology, transportation and the aviation industry. The headquarters in Lippstadt has a large research and development department, its own tool-making department, a CNC-turning department and a synthetics injection moulding plant. As part of the Amphenol Group, CONEC participates in the growth and development opportunities of a globally active group and at the same time acts flexibly and quickly as a medium-sized company in order to optimally adapt to changing customer needs. CONEC is a global player with its own subsidiaries and/or production sites in Canada, the USA, China, the Czech Republic, Poland and France. The product portfolio includes connectors of the following categories: • D-SUB/IP67 D-SUB Connectors • IP67 RJ45 / USB / Mini USB / Fiber Optic LC Duplex • CONEC Hybrid Connectors • Connectors for agricultural and construction machines • Circular Connectors • PCB Connectors • Customer specific solutions The company’s quality management ensures high quality by applying the international standards DIN EN ISO 9001. Depending on the product family, CONEC industrial connectors are tested and approved in accordance with UL, CSA or VDE.

Mājas lapu
WILHELM-PLASTIC GMBH & CO KG

Vācija

We are your partner for design parts and technologically advanced solutions, which we accompany from the prototype up to series production. Working since 1958 in the processing of synthetic materials, we possess a magnitude of experience and extensive knowledge in the development, manufacture, assembly and series introduction of thermoplastic parts. Surface design and tool conception are some of our special areas. The realisation of the quality standard desired by the customer is the top priority for us. We are certified according to IATF 16949-2016 and have made it our aim to consistently further develop our quality assurance system at this level. The best quality, flexibility and delivery reliability underlie our good reputation. The customer satisfaction known by everyone is furthermore guaranteed through friendly and competent specialist advice and comprehensive order support

Mājas lapu
ZIMMER GMBH KUNSTSTOFFTECHNIK

Vācija

Development, prototypes, mould construction, series production, tool transfer. We take care of you at every stage of your project. The all-round, carefree package. In the age of digital transformation, we at THE KNOW-HOW FACTORY accompany our customers worldwide on the road to technological excellence. We see ourselves not only as a technological leader and one-stop manufacturer of hardware and software, but also as a competent research and development partner. The Zimmer Group stands for family business, passion, innovation, stability, know-how and vision to ensure our customers’ growth as a future full-range provider.

Mājas lapu
PAUL THOORS GMBH KUNSTSTOFFVERARBEITUNG

Vācija

Manufacture of suction cups in all variants. Suction cups with threads, suction cups with hooks, suction cups with clamps, suction cups with cross holes, suction cups with studs, suction hooks, double suction cups and wall hooks. Paul Thoors GmbH is a market leader in its sector and has been producing high-quality suction cups and plastic items for a wide range sectors for over 65 years. The majority our total production volume is the manufacturing and distribution of our own products. We also manufacture according to drawings or samples as contracted work and as a supplier. We produce our wide range of products on the very latest production systems, e.g. with insertion robots and automated handling systems, thereby ensuring an efficient and reliable production flow.

Mājas lapu

ERLEMANN & HUCKENBECK GMBH & CO KG

Vācija

Uzņēmums ERLEMANN & HUCKENBECK GMBH & CO KG, ir Ražotājs/ Izgatavotājs, gadā un darbojas Tērauda un metālu formēšana nozarē. Tas darbojas arī Plastmasa - rūpnieciskas izejvielas, Plastmasa - izstrādājumi medicīnai, Mehāniskie pārnesumi - detaļas, Plastmasa - rūpnieciskās iekārtas, Veidnes plastmasai un gumijai, Plastmasa - izstrādājumi automobiļu rūpniecībai, Plastmasa - pusfabrikāti, Plastmasa - rūpnieciskas izejvielas, un Plastmasa - izstrādājumi medicīnai nozarēs. Tas atrodas Radevormwald, Vācija.
STIELER KUNSTSTOFF SERVICE GMBH

Vācija

Uzņēmums STIELER KUNSTSTOFF SERVICE GMBH, ir Pakalpojumu sniedzējs, gadā un darbojas Gumijas un plastmasas iesmidzināšana nozarē. Tas darbojas arī Internal gas pressure, Gas injection technology, git / gid, Gas assisted, Internal water pressure, Water injection technology, WIT, Physical foaming, un SmartFoam nozarēs. Tas atrodas Goslar, Vācija.
JETMOLD GMBH DEUTSCHLAND

Vācija

Uzņēmums JETMOLD GMBH DEUTSCHLAND, ir Ražotājs/ Izgatavotājs, gadā un darbojas Gumijas liešana - iekārtas nozarē. Tas darbojas arī injection moulding, tool manufacturing, un injection moulds nozarēs. Tas atrodas Empfingen, Vācija.
POLY-TOOLS BENNEWART GMBH

Vācija

Uzņēmums POLY-TOOLS BENNEWART GMBH, ir Ražotājs/ Izgatavotājs, gadā un darbojas Plastmasa - rūpnieciskās iekārtas nozarē. Tas darbojas arī Gumijas un plastmasas atliešana ar spiedienu, Technical moulding of plastic parts, injection moulding of plastics, injection moulds, un Gumijas un plastmasas atliešana ar spiedienu nozarēs. Tas atrodas Donsieders, Vācija.

Meklēt cenas priekš

Filtri

Rezultāti

Injection moulding technology - Vācija

Rezultātu skaits

24 Uzņēmumi